4 Expert Guide to Clean Fiberglass Shower Floor

How to Clean a Fiberglass Shower Floor?

A well-maintained and clean fiberglass shower floor not only looks good, but it’s also important for maintaining the overall health of your bathroom. Over time, soap scum, mildew, and hard water stains can build up on the surface of the fiberglass, making it appear dull and dingy. Not only that, but a dirty shower floor can also be a breeding ground for bacteria and germs.

Having a clean fiberglass shower floor may seem like a daunting task, but with the right tools and techniques, it’s actually quite simple. In this blog post, we will go over the steps needed to properly clean and maintain a fiberglass shower floor, so that it stays looking like new for years to come. From gathering the necessary supplies to identifying areas of concern, we will cover everything you need to know to keep your fiberglass shower floor sparkling clean.

Sparkling Clean: Step-by-step Guide on How to Clean Fiberglass Shower Floor

Clean Fiberglass Shower Floor

Gather Supplies:

Before you begin cleaning your fiberglass shower floor, it’s important to gather all the necessary supplies. The materials you’ll need are:

  • A bucket
  • A scrub brush (non-abrasive)
  • Warm water 
  • A non-abrasive cleaner (such as mild dish soap or a specialized fiberglass cleaner)
  • A squeegee
  • A towel or rag for drying

A bucket is needed to mix the cleaner and warm water. A scrub brush is important for scrubbing the surface of the fiberglass and removing any dirt or grime. A non-abrasive cleaner is necessary to prevent damage to the fiberglass surface. You can use a mild dish soap or a specialized fiberglass cleaner. A squeegee will help remove the cleaner and any remaining dirt from the shower floor. Finally, a towel or rag is needed for drying the shower floor after cleaning.

It’s important to use a non-abrasive cleaner and scrub brush because fiberglass is a delicate material that can be easily scratched or damaged. Using abrasive materials can cause discoloration and make the shower floor appear dull and worn. The squeegee is used to remove the cleaner and leftover dirt, making sure that the surface is dry and preventing future stains.

By having all the necessary materials ready, you will save time and ensure that your fiberglass shower floor is cleaned effectively and safely.

Preparation:

Before starting the cleaning process, it’s important to prepare the area by removing any excess debris or standing water. This can be done by using a towel or rag to dry up any puddles or by using a squeegee to remove standing water from the shower floor. Identify any stains or areas of concern such as hard water stains, soap scum, mildew, or any other discoloration.

By removing any excess debris or standing water and identifying areas of concern, you will ensure that your fiberglass shower floor is thoroughly cleaned and that any problem areas are effectively addressed. This will help you to focus on cleaning the specific areas that need the most attention and prevent any damage to the fiberglass surface.

How to Clean Fiberglass Shower Floor:

Step 1. Mixing the cleaner: In a bucket, mix the cleaner with warm water according to the manufacturer’s instructions. Be sure to use a non-abrasive cleaner specifically designed for fiberglass surfaces.

Step 2. Applying the cleaner to the shower floor: Use a rag or sponge to apply the cleaner to the entire shower floor, paying extra attention to the identified areas of concern. Allow the cleaner to sit on the surface for the recommended time according to the manufacturer’s instructions.

Step 3. Scrubbing the floor with a brush: Using a non-abrasive scrub brush, gently scrub the entire surface of the fiberglass, being careful to not scratch the surface. Use circular motions to work the cleaner into the grime and stains.

Step 4. Rinsing off the cleaner: Once you have finished scrubbing, rinse off the cleaner thoroughly with warm water. Use a squeegee to remove any remaining water and cleaner from the shower floor. Dry the surface with a clean towel or rag.

Cleaning Shower Floor to Remove Tough Stains on Fiberglass:

1. Try removing mildew stains with bleach: Mix a solution of 1 part bleach and 3 parts water in a spray bottle. Spray the solution on the mildew stains and allow it to sit for 10-15 minutes. Scrub the area with a non-abrasive brush, then rinse with warm water.

2. Use vinegar to remove stubborn grime: Mix equal parts water and white vinegar in a spray bottle. Spray the solution on the affected area and let it sit for 10-15 minutes. Scrub the area with a non-abrasive brush, then rinse with warm water.

3. Use oxalic acid for tough stains: Oxalic acid can be used to remove tough stains such as rust or hard water stains. Mix a solution of 1/2 cup of oxalic acid with 1 gallon of water. Apply the solution to the stained area, and then scrub with a non-abrasive brush. Rinse the area thoroughly with warm water.

Note: It’s important to wear protective gloves and eye protection when using Oxalic acid, and to follow the manufacturer’s instructions and safety guidelines. Also, ensure have good ventilation while using it, avoid mixing it with other chemicals, and store it in a safe place, away from children and pets. 

4. Remove tough stains with hydrogen peroxide: Mix equal parts of hydrogen peroxide and water in a spray bottle. Spray the solution on the affected area and let it sit for 10-15 minutes. Scrub the area with a non-abrasive brush, then rinse with warm water.

5. Treat tough soap scum with baking soda: Mix a paste of baking soda and water. Apply the paste to the affected area, and then scrub with a non-abrasive brush. Rinse the area thoroughly with warm water.

Maintenance:

Tips for keeping the shower floor clean:

  • Wipe down the shower floor after each use to remove excess water and prevent soap scum from building up.
  • Use a squeegee to remove water from the shower floor after each use.
  • Use a mild, non-abrasive cleaner on a regular basis to prevent the buildup of dirt and grime.
  • Consider using a water softener to prevent hard water stains.
  • Keep the shower area well-ventilated to prevent mildew and mold growth.

1. Regular cleaning schedule:

It’s a good idea to clean the fiberglass shower floor on a regular basis, such as once a week, to prevent dirt and grime buildup. For heavy-use showers or if you have hard water, consider cleaning it twice a week. This will help to keep the shower floor looking like new and prevent the need for heavy-duty cleaning in the future.

2. Preventing staining and discoloration:

  • Use a shower mat or non-slip pad to prevent staining and discoloration caused by hair dyes or other products.
  • Clean up any spills or drips immediately to prevent staining.
  • Keep the shower area well-ventilated to prevent mildew and mold growth.
  • Use a water softener to prevent hard water stains.

Important note:

To keep your fiberglass shower floor looking like new, it’s important to clean it regularly and take steps to prevent staining and discoloration. Remember to test cleaning methods on a small area first, wear gloves and safety goggles when handling chemicals and follow the manufacturer’s instructions and safety guidelines when using any cleaning products. Also, rinse and dry the surface thoroughly to prevent water stains. Regular cleaning and maintenance will ensure your shower floor stays in good condition for years to come. 

FAQs 

What is the best thing to clean fiberglass shower floor?

The best thing to clean a fiberglass shower floor is a non-abrasive cleaner specifically designed for fiberglass surfaces or a mild dish soap mixed with warm water.

How do I get the bottom of my shower white again?

To get the bottom of your shower white again, you can use a non-abrasive cleaner specifically designed for fiberglass surfaces or a mild dish soap mixed with warm water. Scrub the area with a non-abrasive brush and rinse with warm water.

What is the best cleaner for shower floor?

The best cleaner for a shower floor is a non abrasive cleaners for bathroom, or specifically designed for fiberglass surfaces. Some of these specialized cleaners can be found at home improvement stores, or online.

What is the easiest way to clean a shower floor?

The easiest way to clean a shower floor is to wipe down the surface after each use to remove excess water and prevent soap scum from building up. Use a mild, non-abrasive cleaner on a regular basis to prevent the buildup of dirt and grime.

How to clean a fiberglass walk-in shower?

Cleaning a fiberglass walk-in shower is similar to cleaning a regular fiberglass shower floor. Gather necessary materials such as a bucket, a scrub brush, a non-abrasive cleaner, and a squeegee. Mix the cleaner with warm water in the bucket, apply the cleaner to the shower floor, scrub the floor with a brush, and rinse off the cleaner. Repeat the process as needed to remove tough stains or mildew.

Leave a Comment