How to Clean Bissell Carpet Cleaner Brushes?

Having clean carpets can make all the difference when it comes to the overall look, feel, and atmosphere of a home. Having a good-quality carpet cleaner that uses the right brushes is essential to getting the most out of your carpet cleaning experience.

Bissell carpet cleaners provide the best in-home carpet cleaning experience today. Their innovative brush systems are designed for maximum efficacy and to provide deep cleaning results you can count on. Bissell carpet cleaners have a wide selection of brushes to choose from and are designed to work on all carpet types, so you can be sure you’re getting the best clean possible. In this blog post, we’ll explore the different Bissell carpet cleaner brushes and their unique benefits, so you can make an informed decision about choosing the right brushes for your carpet cleaning needs.

How to Clean Bissell Carpet Cleaner Brushes

Having clean carpets is essential for the appearance and quality of any home. Although there are many options for carpet cleaning, using a Bissell carpet cleaner is one of the most effective methods.

However, if you want to get the best results, you must make sure your Bissell carpet cleaner is properly maintained, including regularly cleaning the brushes. Below, we will explain how to clean the Bissell carpet cleaner brushes and provide tips on maintaining your Bissell carpet cleaner to ensure it runs well and provides the best results.

We will discuss the best practices for cleaning the brushes, as well as some common mistakes to avoid. By following the steps outlined in this blog post, you can keep your Bissell carpet cleaner in optimal condition and enjoy the cleanest carpets possible.

Determine if Your Carpet Cleaner Has a Self-Cleaning Brush

If your carpet cleaner has a self-cleaning brush, follow the instructions for cleaning it. If your carpet cleaner does not have a self-cleaning brush, you can clean it with a toothbrush and mild soap.

Check to See if There Is a Clean-Out Hard on The Main Unit

If you have a Bissell cleaning machine that is over 5 years old, it is likely that the brush roll has deteriorated. This can be devastating to your carpet cleaning capabilities as the brushes are one of the key components to removing dirt and debris from your carpets.

To check if this is the case with you, start by checking your user manual. The back of your unit should also have an image depicting where a clean-out hard would be located if it exists on that model of cleaner. If there are no diagrams available in either location, then it’s time to look in some less obvious places for this button or lever which will release the brush roll so you can clean it.

Remove Any Screws Holding the Plate in Place

The first step is to remove any screws holding the plate in place. You’ll want to use a screwdriver for this, but be careful not to damage your unit or injure yourself.

Remove the Plate and Take out The Roller Brush

First, remove the plate from your carpet cleaner. You will see a small lever on the side of it; push it in and lift up to remove it.

Next, take out the roller brush. Make sure you put them both in a safe place so they don’t get dirty. Now that you have your tools.

Move Into an Area with A Drain

Move into an area with a drain. If you’re using the Bissell Carpet Cleaner, don’t try to move it too far since there is no hose or cord attached to the unit. You could end up damaging it if you put too much strain on the small crevice tool and water tank.

I moved my carpet cleaner outside because I didn’t want my house smelling like vinegar or ammonia when I was done cleaning.

Pull the Plastic Ends Off of Each End of The Roller

To begin, you’ll need to pull off the plastic ends on each end of the roller.

This is easy to do, just be careful not to yank too hard, as you may break the roller. Also, try to keep track of where all of these pieces fly off so that you can put them back together properly later. Take a moment at this point to remove any hair or lint from inside each plastic covering before moving on.

Remove Any Hair and Lint from The Plastic Coverings

If you have pets, or if your puppy likes to roll around in the grass outside, it’s likely that there will be hair and lint trapped in the plastic coverings of your Bissell Carpet Cleaner brushes. You can use an old toothbrush to remove any hair that may have gotten stuck in the brush. If you don’t happen to have an old toothbrush handy, a tweezer could also work well for this task.

Unscrew Any Bolts Holding on To the Metal Encasement

To do this, you’ll need a screwdriver. You may need to remove the handle, which is typically located on the top of the machine, so you can reach all four bolts that hold the metal encasement in place.

The metal encasement is what holds your carpet cleaner’s brushes in place. To remove it from your carpet cleaner, unscrew each bolt from its respective holes. Once all four bolts have been removed and placed safely out of harm’s way, carefully lift off the metal encasement by grasping one side with one hand while lifting it up with another hand positioned directly underneath for support.

Take out The Inner Trimmer from The Inside of The Metal Encasement

To begin, you will need to unscrew the bolts holding the metal encasement together. Once this is done, take out the inner trimmer and place it on a towel to dry thoroughly. You can also use a blow dryer on low heat if you wish; just make sure that you don’t overdo it.

Once your brush is completely dry, put all of its pieces back together in reverse order so that when you’re finished cleaning carpets again soon, your carpet cleaner will be as good as new.

Dry Pieces Thoroughly with A Towel

Next, let the brush dry completely. If you don’t want to wait for it to dry naturally, use a towel and gently pat the excess water off of it. Do not use a wet towel.

Do not use a hair dryer or other heat source to dry the brushes; doing so can damage them. Finally, do not vacuum your Bissell Carpet Cleaner ever again if you don’t want your brushes to be destroyed forever.

Put Pieces Back Together in The Reverse Order You Took Them Off

Put the main body back together; make sure everything is put back together properly, including the screws and brush cover. Test your machine to make sure it’s working properly, and that everything spins freely.

Conclusion

In conclusion, keeping the brushes on your Bissell carpet cleaner clean is essential for maintaining the performance and effectiveness of your machine. By following the simple steps outlined in this article, you can easily clean the brushes on your Bissell carpet cleaner and ensure that it is always ready to tackle even the toughest stains and odors. 

Don’t neglect this important aspect of carpet cleaner maintenance; make sure to regularly clean the brushes on your Bissell machine to keep it in top working order. Your carpets will thank you.

 

Leave a Comment